OpenWRT DDNS

This article was written about DDNS (Dynamic DNS (Domain Naming System (not Service))) on OpenWRT, but some of it could apply to DDNS using other platforms. On the server side, BIND / NAMED is used instead of the default OpenWRT DNS Daemon / Service, DNSMASQ. DDNS-SCRIPTS is / are the service(s) used on the client side.

Problems

OK, first, there are some problems getting the entire DDNS infrastructure to work. If you're not interested in these items, skip down a few sections (don't worry, they're addressed there in terms of proper configuration).

Encryption

The DDNS Client scripts for updating a DNS Server via NSUPDATE expects the password to be encrypted using MD5 (HMAC-MD5). The version of the DNSSEC-KEYGEN tool provided by OpenWRT, which is typically used for generating / encrypting a password in this form does not support MD5 (HMAC-MD5). Regardless of the arguments pertaining to MD5 encryption, this issue presents a problem. The workaround is easy if you've got a CentOS, Debian, Ubuntu, etc. version of Linux available, as their version of the DNSSEC-KEYGEN utility does support MD5 (HMAC-MD5) encryption. As of 11.2020, there is very little information on this subject. This web page notes the issue, but there is no answer: https://github.com/openwrt/packages/issues/8927

Permissions

Out of the box, the permissions on the /etc/bind Directory will cause issues (assuming that's where master and slave files are stored, CentOS stores them in /var/named for example). Regardless of the location, the permissions must be set such that the BIND / NAMED Daemon / Service can write to the Directory (a specific example for this is 'journal' files).

Documenation

OpenWRT provides documentation for DDNS (the client side of things, not the server side) here, https://openwrt.org/docs/guide-user/services/ddns/client and here, https://openwrt.org/docs/guide-user/base-system/ddns It isn't the best written documentation in the world. But those guys are busy with other stuff, so that's OK. It also appears to be written by a non-English speaker, so be prepared for some bad grammar and sentences. But again, that's fine, as that person speaks at least one more language than I do (that's a compliment to them). There are also a couple of additional items that have been added to the DDNS Scripts that aren't addressed by the standard OpenWRT documentation and are only mentioned in passing here: https://github.com/openwrt/packages/issues/2348

Installation and Configuration

Installation for Client and Server

Client: opkg install ddns-scripts luci-app-ddns curl *

Server: opkg install bind-server bind-tools (bind-tools includes: bind-rndc bind-check, plus dependencies are all installed)**

If it isn't obvious, the client and server software will not be installed on the same router as DNS server software such as BIND / NAMED rely on having a static IP Address assigned to the OS they're installed on.

See the BIND / NAMED section in this article for additional information on configuration.

The LuCI GUI for the DDNS client is located here: Services, Dynamic DNS

See the Webmin section of this article for a GUI for BIND / NAMED.

* This OpenWRT article discusses and addresses several subjects related to WGET and CURL.

** It is necessary to disable the DNS functionality of DNSMASQ for BIND / NAMED to function properly. If DHCPD is used, and none of DNSMASQ's functionality is necessary, it is highly recommended to remove DNSMASQ instead of disabling it. Odd issues seem to crop up if it remains installed, even if disabled.

Configuration for Client

Below is a working /etc/config/ddns configuration file for DDNS Scripts;

config ddns 'global'
	option ddns_dateformat '%F %R'
	option ddns_loglines '250'
	option upd_privateip '0'
	option use_curl '1'

config service 'WhatEverArbitraryName'
	option service_name 'bind-nsupdate'
	option lookup_host 'WhatEverHostName.WhatEverDomain.COMorNETorORGorETC'
	option username 'WhatEverUserName'
	option password 'WhatEverMD5EncryptedPassword'
	option domain 'WhatEverHostName.WhatEverDomain.COMorNETorORGorETC'
	option enabled '1'
	option ip_source 'web'
	option ip_url 'https://domains.google.com/checkip'
	option bind_network 'wan'
	option force_ipversion '1'
	option interface 'wan'
	option dns_server 'WhatEverDNSServer.WhatEverDomain.COMorNETorORGorETC'

It was found that WGET did not work reliably in situation where the router running the DDNS Client Scripts with a private WAN IP Address was behind another router with a public WAN IP Address. So CURL was used to address the issue. DD-WRT addresses this very issue with a radio button choice titled "Do not use external ip check" (worded poorly as negative questions are always a bit confusing), but OpenWRT offers no similar configuration via its GUI or in the configuration file (/etc/config/ddns).

Configuration for Server

It is not the intent of this article to provide complete documentation on configuring a BIND / NAMED DNS server. This section assumes one has a functioning BIND / NAMED DNS Daemon / Service running.

Below are the directives to add to named.conf (in OpenWRT, the path is /etc/bind/named.conf);

key "ddns" {
      algorithm hmac-md5;
      secret "WhatEverMD5EncryptedPassword";
};

Troubleshooting

For troubleshooting on the client side, under Services, Dynamic DNS, Advanced Settings Tab, enable the Log to file Check Box.

For troubleshooting on the server side, the below directives can be added to /etc/bind/named.conf for a "Kick Ash" * amount of logging for BIND / NAMED;

logging {
    channel default_log {
          file "/tmp/log/named/default.log" versions 3 size 20m;
          print-time yes;
          print-category yes;
          print-severity yes;
          severity dynamic;
    };
    channel general_log {
          file "/tmp/log/named/general.log" versions 3 size 20m;
          print-time yes;
          print-category yes;
          print-severity yes;
          severity dynamic;
    };
    channel database_log {
          file "/tmp/log/named/database.log" versions 3 size 20m;
          print-time yes;
          print-category yes;
          print-severity yes;
          severity dynamic;
    };
    channel security_log {
          file "/tmp/log/named/security.log" versions 3 size 20m;
          print-time yes;
          print-category yes;
          print-severity yes;
          severity dynamic;
    };
    channel config_log {
          file "/tmp/log/named/config.log" versions 3 size 20m;
          print-time yes;
          print-category yes;
          print-severity yes;
          severity dynamic;
    };
    channel resolver_log {
          file "/tmp/log/named/resolver.log" versions 3 size 20m;
          print-time yes;
          print-category yes;
          print-severity yes;
          severity dynamic;
    };
    channel xfer-in_log {
          file "/tmp/log/named/xfer-in.log" versions 3 size 20m;
          print-time yes;
          print-category yes;
          print-severity yes;
          severity dynamic;
    };
    channel xfer-out_log {
          file "/tmp/log/named/xfer-out.log" versions 3 size 20m;
          print-time yes;
          print-category yes;
          print-severity yes;
          severity dynamic;
    };
    channel notify_log {
          file "/tmp/log/named/notify.log" versions 3 size 20m;
          print-time yes;
          print-category yes;
          print-severity yes;
          severity dynamic;
    };
    channel client_log {
          file "/tmp/log/named/client.log" versions 3 size 20m;
          print-time yes;
          print-category yes;
          print-severity yes;
          severity dynamic;
    };
    channel unmatched_log {
          file "/tmp/log/named/unmatched.log" versions 3 size 20m;
          print-time yes;
          print-category yes;
          print-severity yes;
          severity dynamic;
    };
    channel queries_log {
          file "/tmp/log/named/queries.log" versions 3 size 20m;
          print-time yes;
          print-category yes;
          print-severity yes;
          severity dynamic;
    };
    channel network_log {
          file "/tmp/log/named/network.log" versions 3 size 20m;
          print-time yes;
          print-category yes;
          print-severity yes;
          severity dynamic;
    };
    channel update_log {
          file "/tmp/log/named/update.log" versions 3 size 20m;
          print-time yes;
          print-category yes;
          print-severity yes;
          severity dynamic;
    };
    channel dispatch_log {
          file "/tmp/log/named/dispatch.log" versions 3 size 20m;
          print-time yes;
          print-category yes;
          print-severity yes;
          severity dynamic;
    };
    channel dnssec_log {
          file "/tmp/log/named/dnssec.log" versions 3 size 20m;
          print-time yes;
          print-category yes;
          print-severity yes;
          severity dynamic;
    };
    channel lame-servers_log {
          file "/tmp/log/named/lame-servers.log" versions 3 size 20m;
          print-time yes;
          print-category yes;
          print-severity yes;
          severity dynamic;
    };

    category default { default_log; };
    category general { general_log; };
    category database { database_log; };
    category security { security_log; };
    category config { config_log; };
    category resolver { resolver_log; };
    category xfer-in { xfer-in_log; };
    category xfer-out { xfer-out_log; };
    category notify { notify_log; };
    category client { client_log; };
    category unmatched { unmatched_log; };
    category queries { queries_log; };
    category network { network_log; };
    category update { update_log; };
    category dispatch { dispatch_log; };
    category dnssec { dnssec_log; };
    category lame-servers { lame-servers_log; };
};

https://openwrt.org/docs/guide-user/services/ddns/client

Rough Notes

To get it to work properly, below is an example of a router with two WAN connections to the internet where both interfaces are behind other routers (IE, the router with the DDNS service has local IP Addresses assigned to its WAN interfaces);

config ddns 'global'
        option upd_privateip '1'
        option use_curl '1'

config service 'WhatEverService1'
        option enabled '1'
        option interface 'wan1'
        option service_name 'WhatEverService'
        option lookup_host 'WhatEverHost1'
        option username 'WhatEverUserName'
        option password 'WhatEverPassword'
        option domain 'WhatEverDomain2'
        option ip_source 'web'
        option ip_url 'https://domains.google.com/checkip'
        option bind_network 'wan1'
        option force_ipversion '1'

config service 'WhatEverService2'
        option enabled '1'
        option interface 'wan2'
        option service_name 'WhatEverService'
        option lookup_host 'WhatEverHost2'
        option username 'WhatEverUserName'
        option password 'WhatEverPassword'
        option domain 'WhatEverDomain2'
        option ip_source 'web'
        option ip_url 'https://domains.google.com/checkip'
        option bind_network 'wan2'
        option force_ipversion '1'

• Use the option use_curl '1' directive when using DDNS with a Dual WAN Router
• If the router with the DDNS functionality is behind another router (like a hotspot, etc.), then the following directives should be configured for proper functionality;
  • use_curl '1'
  • interface 'WhatEverInterface' (not the "ifconfig" or "ip a" name, but the OpenWRT Name found in the LuCI GUI, Network, Interfaces)*
  • ip_source 'web'
  • ip_url 'WhatEverServiceLikeGoogle'
  • bind_network 'WhatEverInterface' (not the "ifconfig" or "ip a" name, but the OpenWRT Name found in the LuCI GUI, Network, Interfaces)*
  • force_ipversion '1'
  • ...and his requires CURL be installed: opkg install curl

* In the above example, wan1 and wan2 are just place holders. In real world circumstances, wan, wwan, etc. would be used, NOT eth1.2

The OpenWRT documentation states WGET is used by default, but for dual WAN routers, make sure the above noted use_curl directive is set.

Some good hints came from here: https://github.com/openwrt/packages/issues/8277

DDNS and BIND (IE, ditching a service like DynDNS)

opkg update

opkg install wget curl bind-client bind-host ddns-scripts_nsupdates

https://openwrt.org/docs/guide-user/services/ddns/client

https://bind9.readthedocs.io/en/v9_16_5/advanced.html

https://bind9.readthedocs.io/en/v9_16_5/manpages.html#man-nsupdate

Nice example, but without using the OpenWRT DDNS service (uses a custom script): https://www.foell.org/justin/diy-dynamic-dns-with-openwrt-bind/

https://www.leurent.eu/wiki/FAQ:OpenWRT