Cudy AP3000 Indoor AKA Jupiter 2 and OpenWRT: Difference between revisions
m →Notes |
|||
| Line 75: | Line 75: | ||
loadx 0x42000000 | loadx 0x42000000 | ||
</syntaxhighlight> | </syntaxhighlight> | ||
[[File:Putty Command Prompt for Cudy AP3000 upgrade.png|alt=Putty Command Prompt for Cudy AP3000 upgrade|left|thumb|Putty Command Prompt for Cudy AP3000 upgrade]] | |||
And it will wait, slowly printing out CCCC | |||
<br /> | |||
===On Host PC (on Linux)=== | |||
Sorry guys, there is no equivalent command in Windows, unless you're running a Linux sub-system. | |||
Assuming `/dev/ttyUSB0` is your serial device, 115200 is the speed, and the usual "8 none 1"; | |||
Assuming `/dev/ttyUSB0` is your serial device | |||
<syntaxhighlight lang="bash"> | <syntaxhighlight lang="bash"> | ||
sx -vv WhatEverNameOfFile.bin < /dev/ttyUSB0 > /dev/ttyUSB0 | sx -vv WhatEverNameOfFile.bin < /dev/ttyUSB0 > /dev/ttyUSB0 | ||
</syntaxhighlight>...but first download the "InitRAMFS" File from OpenWRT: https://downloads.openwrt.org/releases/24.10.0/targets/mediatek/filogic/ (look for Cudy AP3000, without the 'outdoor' reference, but notice it is the same size file, so probably the same file with a different name) | </syntaxhighlight>...but first download the "InitRAMFS" File from OpenWRT: https://downloads.openwrt.org/releases/24.10.0/targets/mediatek/filogic/ (look for Cudy AP3000, without the 'outdoor' reference, but notice it is the same size file, so probably the same file with a different name) | ||
[[File:Command Prompt Showing Transfer of File for Cudy AP 3000.png|alt=Command Prompt Showing Transfer of File for Cudy AP 3000|thumb|Command Prompt Showing Transfer of File for Cudy AP 3000]] | |||
Now wait. And wait, and wait. Yes, the file is under 9 MB, but look up a couple of sentences and notice the speed things are transferring at. The SX Command will show "Progress". There will be no indication on the Serial / TTL session that anything is happening at all (but if your Serial USB device has LEDs, then they'll be blinking really fast or almost on solid showing a high transfer rate). | |||
===Image Inspection in U-Boot=== | ===Image Inspection in U-Boot=== | ||
| Line 118: | Line 124: | ||
*To make this repeatable, avoid saving `bootcmd` unless a custom autoboot is configured. | *To make this repeatable, avoid saving `bootcmd` unless a custom autoboot is configured. | ||
== Pin Hole Headers (top of PCB with edge closest to the holes at the top) == | ==Pin Hole Headers (top of PCB with edge closest to the holes at the top)== | ||
[[File:Cudy AP3000 (Indoor Jupiter 2) TTY Serial Headers.jpg|alt=Cudy AP3000 (Indoor Jupiter 2) TTY Serial Headers|center|thumb|Cudy AP3000 (Indoor Jupiter 2) TTY Serial Headers]] | [[File:Cudy AP3000 (Indoor Jupiter 2) TTY Serial Headers.jpg|alt=Cudy AP3000 (Indoor Jupiter 2) TTY Serial Headers|center|thumb|Cudy AP3000 (Indoor Jupiter 2) TTY Serial Headers]] | ||
<br /> | <br /> | ||