PowerConnect 2808: Difference between revisions
m →Quick D |
mNo edit summary |
||
| Line 10: | Line 10: | ||
*Press button (less than 7 seconds) for managed mode (in reset mode) | *Press button (less than 7 seconds) for managed mode (in reset mode) | ||
*192.168.2.1 (admin / - ) | *192.168.2.1 (admin / - ) | ||
* | *Check, Use Current IP, Use Current Name (no changes in actual IP allowed) | ||
*Wait for it to reboot, wait some additional time, keep waiting, too much time has passed, oh, there, it's responding | *Wait for it to reboot, wait some additional time, keep waiting, too much time has passed, oh, there, it's responding | ||
*And now the real interface is available | *And now the real interface is available | ||
| Line 16: | Line 16: | ||
*Reset / reboot | *Reset / reboot | ||
*Wait, wait some more, but not as long as before. | *Wait, wait some more, but not as long as before. | ||
*Reset to factory defaults (General, File Management, Restore Default, good spot for it huh?) | *Reset to factory defaults (General, File Management, Restore Default, good spot for it huh?), REMEMBER TO RESTART IT. | ||
*System green, the trap is clean... | *System green, the trap is clean... | ||
| Line 25: | Line 25: | ||
*Press the reset switch briefly (less than 7 seconds). Give it a couple of seconds and the Managed Mode light will up and the device will respond to pings, telnet, and web GUI at its default IP Address of 192.168.2.1 | *Press the reset switch briefly (less than 7 seconds). Give it a couple of seconds and the Managed Mode light will up and the device will respond to pings, telnet, and web GUI at its default IP Address of 192.168.2.1 | ||
*The switch will then enter the "Restore Saved Configuration" mode where it will respond to telnet (limited and virtually useless) and web GUI. The choices are Radio Buttons and a Checkbox. | *The switch will then enter the "Restore Saved Configuration" mode where it will respond to telnet (limited and virtually useless) and web GUI. The choices are Radio Buttons and a Checkbox. | ||
* | *Check the "Restore Saved Configuration" Checkbox and select; | ||
**"Local Configuration" Button: The "Local Configuration" are factory defaults at this point (remember, the "reset" button was pressed in an above step) | **"Local Configuration" Button: The "Local Configuration" are factory defaults at this point (remember, the "reset" button was pressed in an above step) | ||
**"Use Current IP": This will use the "reset" / "default" IP Address of 192.168.2.1 | **"Use Current IP": This will use the "reset" / "default" IP Address of 192.168.2.1 | ||