Difference between revisions of "GL iNet GL AR300M"
Jump to navigation
Jump to search
(Created page with "https://openwrt.org/toh/gl.inet/gl-ar300m Without a USB Flash drive; /dev/mtdblock4: /rom (squashfs, Boot Image) /dev/mtdblock5 /overlay (where all the read / write stuff is stored) ==== ...to mount the above /dev/mtdblock5 (in the instance of changing from a USB Flash Drive designated as /overlay) and access FSTAB ==== mkdir /tmp/mtd5 mount -t jffs2 /dev/mtdblock5 /tmp/mtd5 nano /tmp/mtd5/upper/etc/config/fstab") |
m |
||
| Line 7: | Line 7: | ||
/dev/mtdblock5 /overlay (where all the read / write stuff is stored) | /dev/mtdblock5 /overlay (where all the read / write stuff is stored) | ||
==== ...to mount the above /dev/mtdblock5 (in the instance of changing from a USB Flash Drive designated as /overlay) and access FSTAB ==== | ====...to mount the above /dev/mtdblock5 (in the instance of changing from a USB Flash Drive designated as /overlay) and access FSTAB==== | ||
mkdir /tmp/mtd5 | mkdir /tmp/mtd5 | ||
| Line 13: | Line 13: | ||
nano /tmp/mtd5/upper/etc/config/fstab | nano /tmp/mtd5/upper/etc/config/fstab | ||
==== Why do that? ==== | |||
Disk (USB Flash Drive) Maintenance silly! Especially if the router is in a location where one can't easily pull out the external USB Flash Drive. | |||
fsck.ext4 /dev/WhatEverSDAx | |||
Revision as of 18:54, 31 December 2024
https://openwrt.org/toh/gl.inet/gl-ar300m
Without a USB Flash drive;
/dev/mtdblock4: /rom (squashfs, Boot Image)
/dev/mtdblock5 /overlay (where all the read / write stuff is stored)
...to mount the above /dev/mtdblock5 (in the instance of changing from a USB Flash Drive designated as /overlay) and access FSTAB
mkdir /tmp/mtd5
mount -t jffs2 /dev/mtdblock5 /tmp/mtd5
nano /tmp/mtd5/upper/etc/config/fstab
Why do that?
Disk (USB Flash Drive) Maintenance silly! Especially if the router is in a location where one can't easily pull out the external USB Flash Drive.
fsck.ext4 /dev/WhatEverSDAx