wiki.TerraBase.info

Cudy AP3000 Indoor AKA Jupiter 2 and OpenWRT: Difference between revisions

← Older editNewer edit →
VisualWikitext
Line 116: Line 116:


==Final Result==
==Final Result==
OpenWRT was permanently installed on flash using the SquashFS image, without requiring a network or TFTP boot. All steps were performed over a serial console with full visibility into memory layout and safe load addresses.
OpenWRT should be permanently installed.


==Notes==
==Notes==
Line 126: Line 126:
==Pin Hole Headers (top of PCB with edge closest to the holes at the top)==
==Pin Hole Headers (top of PCB with edge closest to the holes at the top)==
[[File:Cudy AP3000 (Indoor Jupiter 2) TTY Serial Headers.jpg|alt=Cudy AP3000 (Indoor Jupiter 2) TTY Serial Headers|center|thumb|Cudy AP3000 (Indoor Jupiter 2) TTY Serial Headers]]
[[File:Cudy AP3000 (Indoor Jupiter 2) TTY Serial Headers.jpg|alt=Cudy AP3000 (Indoor Jupiter 2) TTY Serial Headers|center|thumb|Cudy AP3000 (Indoor Jupiter 2) TTY Serial Headers]]
<br />
 
== References (minor as they might be) ==
https://eko.one.pl/forum/viewtopic.php?id=24096 (some parts are in Polish, so use your web browser's translate capability)
Retrieved from "https://wiki.terrabase.info/wiki/Cudy_AP3000_Indoor_AKA_Jupiter_2_and_OpenWRT"