Linksys AC Series Router Configuration Tips for OpenWRT

wiki.TerraBase.info
Revision as of 03:17, 25 July 2020 by Root (talk | contribs) (Created page with "Most of this article is focused on the OpenWRT Firmware / OS (Operating System) <br /> == Telnet == Telnet is supported (and works) on DD-WRT, but OpenWRT has essentially di...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Most of this article is focused on the OpenWRT Firmware / OS (Operating System)


Telnet

Telnet is supported (and works) on DD-WRT, but OpenWRT has essentially discontinued use of telnet in the name of security. It is possible to build a custom version of the OpenWRT software that supports telnet.

Switching Boot Partitions

Commands for OpenWRT

  • To determine which boot partition is active: /usr/sbin/fw_printenv -n boot_part
  • To change which boot partition is active: /usr/sbin/fw_setenv boot_part 1 OR /usr/sbin/fw_setenv boot_part 2

Commands for DD-WRT

  • To determine which boot partition is active:ubootenv get boot_part
  • To change which boot partition is active: ubootenv set boot_part 1
Retrieved from "https://wiki.terrabase.info/index.php?title=Linksys_AC_Series_Router_Configuration_Tips_for_OpenWRT&oldid=600"