1,723
edits
Difference between revisions of "Linksys AC Series Router Configuration Tips for OpenWRT"
Linksys AC Series Router Configuration Tips for OpenWRT (view source)
Revision as of 09:29, 22 March 2021
, 09:29, 22 March 2021→Storage: Internal NAND Flash Memory, USB Flash Drives, and eSATA Drives
| Line 287: | Line 287: | ||
[[File:90 Degree Cable.jpg|alt=90 Degee Cable|left|thumb|121x121px|90 Degee Cable]] | [[File:90 Degree Cable.jpg|alt=90 Degee Cable|left|thumb|121x121px|90 Degee Cable]] | ||
And did locate a cable that has chance (didn't test it by buying it) of fitting behind the above 90° USB 3.0 Hub noted above. The cable would also then have to bend at quite an angle to clear what ever the router was mounted on or sitting on. But it seems possible. | And did locate a cable that has chance (didn't test it by buying it) of fitting behind the above 90° USB 3.0 Hub noted above. The cable would also then have to bend at quite an angle to clear what ever the router was mounted on or sitting on. But it seems possible. It's from this company: http://www.wire-cable-solution.com/showing_2395_2071/ESATA-7Pin-small-90-to-SATA-First-generation.html | ||
Watch out for other idiot sellers that list an "eSATA" cable that isn't. Look closely and you'll see that it's an internal SATA connector. The best tip when searching is to switch to Google or Bing images to find the proper cable. | |||
Google also gives some false hope when searching for a cable like this when it shows just the item, but the link is dead or is redirected to generica SATA cables. | |||
<br /> | |||
====Bottom Line==== | ====Bottom Line==== | ||